Published at Wednesday, April 22nd, 2020 - 20:36:15 PM. Woodworking Design. By .
The objective is to open the pores to restore the aroma that is waiting to be let loose. There are a couple of ways you can do this. One method is to very lightly sand the surface using a fine 200 grit sandpaper on a sanding block. What this will do is the sandpaper will penetrate the pores and will open up pockets in the wood where the precious cedar oil is contained. Be very careful with the sanding though as you don’t want to end up with scratch marks. This is avoidable if you sand in the same direction as the grain. You will find that it’s not going to take much sanding before you smell the aroma of the cedar once again.
Wherever you go, keep your eyes peeled for good ideas. If you are not confident in your ability to come up with a design from scratch, then it is perfectly acceptable to get your ideas from others. If you see a piece of furniture that catches your eye, take a picture of it, so that you will have something to refer to later.
Any content, trademark’s, or other material that might be found on the pinkterrier website that is not pinkterrier’s property remains the copyright of its respective owner/s. In no way does pinkterrier claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.